Beissbarth VAS 6430 Originalbetriebsanleitung Seite 21

5. Installation/erection
5.1 Adjustment device 6430/1
Fig. 1: Base frame
i
Taper discs, conical sockets and cup springs are to
be left in their as-delivered condition.
Fig. 2: Stand
Beissbarth GmbH
Installation/erection | VAS 6430 | 21 | en
1. Use the pre-fitted bolts to attach the stand to the
base frame.
2. Fix the hand crank in position on the square section
of the worm shaft using a stud.
Fig. 3: Stand with base frame
Fig. 4: Lower stand mount
3. Remove the stop pin from the lower stand mount.
|
1 690 386 012 2013-09-24