Chauvet DJ SlimSTRIP UV-18 IRC Kurzanleitung Seite 4

SlimSTRIP™ UV-18 IRC QRG
Mounting
Mounting Diagram
Control Panel
Description
Menu Map
Main Function
DMX Personality and
Starting Address
Custom
Sound-Active
Sound Sensitivity
Infrared
Before mounting this product, read the Safety Notes. Use at least two mounting
points per product. Make sure the mounting clamps are capable of supporting the
weight of the product. For our CHAUVET® line of mounting clamps, go to
www.chauvetlighting.com/cables-clamps-main.html.
Mounting Clamps
Safety Cable
(such as CH-05 from
Button
<MENU> Exits from the current menu or function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Programming Levels
3-CH d 1–d512
d 0–d255
U--
S 0–S255
Snd
SenS u 0–u100
SET
CHAUVET®)
L-Brackets
(x2)
(also used as floor supports)
Selects the DMX personality and starting
address
Selects the custom UV output (0–100%)
Selects the strobe speed (0–33 Hz)
Sets the Sound-Active mode
Selects the sound sensitivity
On
Turns infrared on or off
OFF
4
Function
Description
EN
Bracket
Adjustment
Knobs (x2)