BASETech 591177 Bedienungsanleitung Seite 4

Operation
Please always observe the information given in chapter "Notes on installation".
• Lay out the LED rope light at the location of your choice. Use cable ties, for example, to fix
it into place.
• Plug the safety power plug of the LED rope light into an appropriate safety socket outlet.
If the LED rope light is used outdoors, the LED rope light may only be connected to an IP44
power socket.
• Immediately after the LED rope light is connected to the mains, the LEDs will light up.
• If you do not use the product any longer, disconnect the power plug from the power socket.
• Keep the LED rope light in a dry, clean, frost-protected place, and out of the reach of children.
Maintenance and cleaning
• The product does not require any maintenance and should never be disassembled for any
reason.
• Before cleaning the product, disconnect the mains voltage; unplug the power plug from the
power socket.
• For cleaning, a dry, clean, soft cloth is sufficient. Do not use aggressive cleansers, as this
may cause discolouration or may have a negative impact on the material of the LED rope
light.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
a) General
Operating voltage ................................. 220 – 240 V/AC, 50 Hz
Protection class ................................... II
Protection type ...................................... IP44
Bending radius ...................................... > 30 mm
Length of power cable .......................... 1,5 m
Operating/Storage conditions ............... -25 to +45 ºC, 30 - 85 % RH
b) LED rope light, 6 m
Power consumption .............................. max. 12 W
Current consumption ............................ max. 54 mA
Illuminant .............................................. 216 LEDs (36 LEDs per meter)
Colour ................................................... BN 591177 white,
Total length ........................................... 7.5 m
Weight .................................................. 1.1 kg
c) LED rope light, 10 m
Power consumption .............................. max. 20 W
Current consumption ............................ max. 90 mA
Illuminant .............................................. 360 LEDs (36 LEDs per meter)
Colour ................................................... BN 591704 white,
Total length ........................................... 11.5 m
Weight .................................................. 1.8 kg
BN 591624 warm white,
BN 591178 blue,
BN 591680 red,
BN 591681 yellow,
BN 591683 multi-color
BN 591705 warm white,
BN 591707 blue,
BN 591708 red,
BN 591710 yellow,
BN 591709 multi-color
d) LED rope light, 20 m
Power consumption .............................. max. 40 W
Current consumption ............................ max. 180 mA
Illuminant .............................................. 720 LEDs (36 LEDs per meter)
Colour ................................................... BN 591712 white,
Total length ........................................... 21.5 m
Weight .................................................. 3.5 kg
Minor changes in dimensions are production related.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
BN 591713 warm white,
BN 591714 blue,
BN 591715 red,
BN 591720 yellow,
BN 591717 multi-color
V1_1214_02-KV