Clatronic CDP 514 CK Bedienungsanleitung, Garantie Seite 18

4...._05_CDP 514 CK
2. Insert 2 1.5V AA type batteries. Match the polarities correctly (see the inside of
GB
the battery compartment or the marking on the outside).
3. If the device is not used for a long period of time, remove the batteries to avoid
the „spilling" of battery acid.
4. A battery symbol on the display indicates that the batteries need to be changed.
Always change the battery set completely, do not change just one battery.
Warning: batteries are not to be disposed of together with domestic wastes.
Dispose of the used batteries at the relevant collection bin or at your dealer's.
Never throw batteries into the fire.
AC Adapter Mode
You can choose to use the device with the supplied AC adapter.
1. Insert the AC adapter into a duly installed 230V/50Hz protective contact outlet.
2. Connect the CD player to the AC adapter by connecting the jack of the adapter
into the 4.5V/DC socket.
3. When using an adapter (4.5V DC/500 mA) match the polarities correctly as
indicated on the CD player.
Car Operating Mode
Thanks to the adapter cassette and the cigarette lighter adapter the CD player can
be used on your car radio with the cassette adapter.
1. Insert the cigarette lighter adapter in the cigarette lighter and the jack at the end
of the cable into the 4.5V/DC socket of the CD player.
2. Insert the jack of the adapter cassette into the AUX OUT socket of the CD player.
3. Switch on your car radio and insert the adapter cassette into the cassette deck.
Make sure that the connector cable of the adapter cassette is inserted correctly
into the cassette slot! The cassette mechanism may jam!
Some car radios may eject the adapter cassette immediately after inserting it. In
this case fit the cassette's connector cable along the slot and insert the cassette
turned over on the other side. If the car radio ejects the adapter cassette again, the
adapter cassette cannot be used.
BASS-BOOST:
VOLUME:
LINE-OUT:
4,5 V-BUCHSE:
PHONES:
CHARGE:
18
03.12.2001 12:48 Uhr
General Operation
increases the bass sound.
is used to set the volume of the music.
for connection to a stereo system, for example.
for connecting a mains adapter.
for connecting head- or earphones.
The charging function is activated when connected to an
external mains line. Make sure that there are no batteries in the
battery compartment. Danger of explosion! Use only appropriate
rechargeable batteries!
Seite 18