Werbung
Elektrische Anschlüsse: AMP-Flachstecker 6,3 x 0,8 mm
Kabeldurchführung:
Montageart:
Kontaktanordnung:
Schutzart:
TECHNICAL DATA
Maximum operating
pressure:
Medium:
Temperature range
Medium and ambient
temperature:
Storage temperature:
Diaphragm material:
Pressure connections:
Housing materials
Switch body:
Cover:
Weight:
Mechanical working life: over 10
Electrical rating:
Electrical connections:
Cable entry:
Mounting:
Arrangement of contacts:
Protection:
nach DIN 46244 oder aufsteckbare Schraubklemmen;
Kabeldurchführung mit integrierter Kabelzugentlastung
Hutmutterverschraubung
mit Befestigungsaugen
2 NO
3 COM
1 NC
P
IP 54
10 kPa for all pressure ranges
combustible and non-aggressive gases
-20 °C ... +70 °C (limited from +85 °C to +70 °C
due to PVC-hose)
-40 °C ... +70 °C (limited from +85 °C to +70 °C
due to PVC-hose)
silicone, tempered at 200 °C, free of gas emissions
2 plastic pipe connection pieces (P1 and P2),
external diameter 6.0 mm:
P1 for connection to higher pressure (marked +);
P2 for connection to lower pressure (marked –)
PA 6.6
PS
150 g
switching operations.
6
max. 1.0 A (0.4 A) / 250 V
AMP flat plug 6.3 x 0.8 mm acc. to
DIN 46244 or push-on screw
ter-minals. Cable conduit with
cable strain relief.
Cap nut conduit AF20
with fastening lugs
2 NO
3 COM
1 NC
P
IP 54
SW20
1 Ruhekontakt
2 Arbeitskontakt
3 Zuleitung
AC
1 Break contact
2 Operating contact
3 Power supply line
air, non-
Werbung
