Installation - Zehnder Timer RF Betriebsanleitung

2. Installation

Select a location to fit the Timer RF so that there are no
large metal objects in the vicinity of the ventilation unit
and the Timer RF. If the RF range is not far enough, an
RF Repeater may be used.
Follow the installation instructions at the beginning of
the manual.
If the Timer RF needs to connect with a ComfoSense
C: Activate menu ADVANCED SETTINGS. > RF
PAIRING > START instead of steps 7 to 9.
If the Timer RF needs to connect with an RF PCB
of the ComfoAir Q, Comfort Vent Q or AERISnext:
Activate menu ADVANCED SETTINGS. > RF
SETTINGS > START RF PAIRING instead of steps 7
to 9.
16 - EN