sebaKMT HL 50 Bedienhandbuch Seite 11

Wireless headphones
Corded headphones
Accessory part Description
PAM T-3-1 Robust sensor-rod microphone for soft grounds;
incl. connection cable
LOG TP Tripod adaptor
AD S-20 Valve adaptor (Ø 20 mm)
AD S-42 Valve adaptor (Ø 40 mm)
Headphones
The HL 50 comes with wireless headphones. These have the following operating
elements:
ON / OFF ... ON/OFF switch
TUNE
... Frequency selection control dial
VOL
... Volume control dial
Via the audio socket
After connecting the headphones, the HL 50 has to be restarted. The headphones are
recognised automatically by the device. While there are corded headphones connected,
the use of the wireless headphones is not possible.
The volume of the headphones can be adjusted via the buttons
After removing the corded headphones, the HL 50 does not automatically switch back to
the wireless headphones mode. The device needs to be restarted for this purpose.
Energy Supply
The device is delivered with the following batteries:
2 x 1.5 V AA LR6
Alternatively, rechargeable 1.2 V NiMH batteries can be used (min. 1800 mAh).
When the battery level is low, a flashing battery symbol appears at the top of the
display.
Empty batteries can be replaced. For this purpose, loosen the screw at the backside of
the device and remove the cover. Pay attention to the correct polarity when inserting the
new batteries. Then re-attach the cover and
Don´t overtighten!
Please act carefully and without violence at all times, in order to avoid
damaging the components.
, any corded headphones can be connected to the HL 50.
11
Art.Nr.
1003846
128309877
810000357
810000358
and
tighten the screw carefully.
English
.