Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. O
PERATION
This product is not designed for continual use. Make sure there are regular breaks during operation to maximize the life
of your laser. Always disconnect the Kinta FX from power when not in use.
Control Panel
Operation
Menu Map
Mode
DMX
Static Color
Auto
Speed
Sound
Manual Color
IR Function
Auto and Sound Modes Defined
Program Effect
*1
All effects
Beam and Strobe
*2
Beam and Laser
*3
*4
Laser and Strobe
Beam Only
*5
*6
Strobes Only
*7
Laser Only
Kinta FX User Manual Rev. 1
To access the control panel functions, use the four buttons located underneath the display.
When the product is on, the LED monitor on the rear panel will show the current operating mode
(Standalone or DMX). The product will retain the last saved settings when powered off.
Button
Function
<MENU>
Selects an operation mode or backs out of the current menu option
<UP>
Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER>
Activates a menu option or a selected value
Programming Steps
2-CH
9-CH
C--
P--
S--
SND
U--
SET
–d511
d001
–d504
d001
C001–C015
P001-007
S.00–S.99
SNd1-7
R001–R255
G001–G255
F.00–F.99
B001–B255
W001–W255
ON
OFF
Description
Sets DMX personality and address
Selects Static Color
Selects Auto Program Effect
Speed for Sound Mode and Auto Programs
Selects Sound Active Mode Program Effects
Sets Manual Color choice and Strobe speed (slow to
fast)
On/Off IR functions
Page 19 of 117
Werbung
