SVBONY SV105 Bedienungsanleitung Seite 7

4.3 Equipment connecting
Please connect camera to the computer's USB port by using the original
USB cable. Remove the optical eyepiece, and input the camera to the
eyepiece hole.
Note: DO NOT use an extension cord or USB HUB that may affect the
speed and stability of image transmission.
5.Camera Cleaning
If you find dust on the CMOS sensor, you can remove the front half of the
camera. Then use the cleaning tool to clean the CMOS sensor. You must
be careful when cleaning it. You can also use a DSLR cleaning tool or lens
tissue to clean it. Be careful not to use too much force, because the
coating of the CMOS sensor is very fragile and can be scratched easily.
The general identification of whether the dust is on the sensor or on the
window glass is as follows.
04