Herunterladen Inhalt Inhalt Diese Seite drucken

TaoTronics TT-BR02 Bedienungsanleitung Seite 5

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
How to Use
1. Charging
The receiver can be fully charged in around 2 hours.
We recommend charging the unit for least 4 hours
before first use.
To charge the receiver:
1) Insert the micro-USB end of the charging cable into
the charging port of the receiver;
2) Plug the USB end of the charging cable to any USB
power source;
3) The power LED will turn red when charging and
automatically turn OFF when it's fully charged.
Note: You can use the TT-BR02 while it is charging.
2. Bluetooth Pairing
To connect TT-BR02 with other Bluetooth device, you
must first bring it into pairing mode.
1) Please turn off other Bluetooth devices nearby, and
make sure the TT-BR02 and your Bluetooth device are
close together (within 3 feet) ;
2) Press and hold the power button for about 7
seconds until the BT LED flashes red and blue
alternately. Now the TT-BR02 is in pairing mode;
3) Activate Bluetooth function on your device and
search for the nearby Bluetooth connection
• For iPhone® : Settings > Bluetooth > On
• For Android™ : Settings > Bluetooth: On > Scan for
devices
4) " Ta o Tro n i c s T T- B R 0 2 " s h o u l d b e l i s te d i n t h e
search results. Select the name to connect. Once
connected, only the blue LED remains.
Note:
• While bringing the device into pairing mode, please
note that the blue LED will light up first; just keep
holding the button until you see blue and red
flashing alternately.
• If a PIN code is required for pairing, please try "0000"
or "8888" (4 zero or 4 eight)
3. Re-connect
The TT-BR02 Bluetooth receiver can remember previous
paired devices. If you have previously paired the
receiver with a device, simply turn on your device
and the receiver (by pressing the power button for
3 seconds), they will connect automatically without
going into pairing mode every time.
4. Play/Pause Music
While streaming music through the receiver, you can
press the power button to pause/resume the music
playing.
If the receiver is paired with your cell phone, an incoming
phone call will pause the music automatically.
05/06

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis