Light Sensor; How To Install - SwitchBot Contact Sensor Benutzerhandbuch

Light Sensor

Light Sensor is used for detecting whether it is bright or dark in the target environment.
You can define the threshold for being bright or being dark in the app. Navigate to the
Settings page of Contact Sensor in the app for more information.

How to Install

Adhere to a door or a window.
Peel of the protective film from the Contact Sensor and Magnet.
Line up Contact Sensor and Magnet on the door or window and make sure the Magnet
is aligned with the bottom of Contact Sensor.
Stick the Contact Sensor on the door/window and Magnet on the frame or the other way
around. Make sure the gap between the sensor and the magnet is less than 30mm when
the door or window is closed.
Apply pressure to the Contact Sensor and Magnet for 60 seconds so that they are firmly
attached.
Magnet is aligned with the
bottom of the Contact Sensor
7