Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop
before removing obstructions, clearing debris, or servicing unit.
NOTE
Refer to your power source Operator's Manual for correct engine fueling, starting and stopping instructions.
Operation
WARNING
1.
Hold unit on your right side resting sweeper brushes on work
surface.
2.
Firmly grasp throttle grip with right hand and front handle
with left hand.
3.
Position unit at an angle to the work surface well out in front
of your body.
The sweeper brushes rotate towards the operator. Do not
operate unit at an angle with brushes close to your body
which could result in loss of control and possible serious
injury.
4.
Accelerate to full throttle and allow brushes to push debris
ahead. Sweep to an area where debris can be piled and col-
lected.
IMPORTANT
Extended use of unit at low throttle settings could cause dam-
age to clutch because of clutch slipping.
5.
Debris may be swept out and away from corners by turning
unit over to reverse brush direction. Grip unit securely using
both hands. Operate throttle trigger with thumb of right hand.
For extended use, reposition front handle to allow comforta-
ble grip. Return handle to normal position for regular opera-
tion.
Turning unit over to reverse sweeper drum rotation will
cause debris to be swept toward operator. Reduce engine
speed, and be alert for unstable footing caused by loose
debris.
6.
When sweeping wide areas, angle brushes to pile debris in
rows; then collect material.
7.
Use an angle of 15-30º. This helps direct debris and reduces
operator fatigue.
12
WARNING
WARNING
Werbung
