V. Brøndum RONDA Big Bag Betriebsanleitung Seite 20

RONDA
®
Pre-separator for collection of large volumes in big bag
Congratulations with your new RONDA
Before using the pre-separator, please read this
manual.
This user manual must at all times be available for the
operator.
General description
RONDA Big Bag Pre-separator is designed for collection of large quantities of material/dust in standard big bags
®
(75x115x130 cm). Using a standard hose, the pre-separator can be connected with one or two vacuum cleaners,
depending on the suction power needed for the specific task.
The effect of the pre-separator is to "sort out" the vacuumed material, before the air is passed on to the vacuum
cleaner. The material is sucked into the pre-separator, and by activating the shock valve, the material is released
into the big bag. Depending on the type of material, the hose length, and the air flow, 80-95 % of the vacuumed
material is held back by the pre-separator, whereas only a small part ends up in the vacuum cleaner. This
reduces the impact on the filters of the vacuum cleaner. At the same time, the productivity is considerably
increased, as the downtime when emptying the vacuum cleaner is minimized.
NOTE! Please read the safety instructions on page 25-26 of this user manual.
Technical Data
Recommended airflow, max.
Collection capacity*
Height
Width
Length
Weight
Coupling
*) Big bag / pre-separator
V. BRØNDUM A/S
Big Bag pre-separator
Big Bag pre-separator from V. BRØNDUM A/S
®
600 m /h
3
1100/60 litres
2550 mm
1000 mm
1250 mm
70 kg
38/50 mm

RONDA Big Bag forudskiller / Vorabscheider / Pre-separator 20