ChRONOGRAph STOpWATCh VD54
(with date-VD53)
(1 crown/2 pushers)
MINUTE HAND
SECOND HAND
Time and Date Setting
1. Before setting the time, make sure the chronograph is stopped and set to
zero (12:00) position.
2 . Pull crown out to position 2 .
3. Turn crown clockwise until the previous day's date is displayed.
4 . Pull crown out to position 3 when the second hand is at the 12:00 position .
5. Turn crown to set time.
NoTe: The movement of the 24-hour hand corresponds to the hour and
minute hands. When setting the time be sure to check that the 24-hour
hand is set properly.
6 . Return crown to position 1 .
NoTe: When the crown is in position 2, do not press the pushers.
otherwise the chronograph hands will move.
A
24-HOUR HAND
1 2 3
B
6
Chronograph
1 . Press A to start/stop the chronograph .
2. Press B to reset to zero.
Split Time
1 . Press B while the chronograph is running .
2 . Press B again to return to the chronograph .
3. Press A to finalize timing.
4 . Press B to reset .
Chronograph Zero Reset
1. If either of the chronograph hands is not at the zero (12:00) position, pull
crown out to position 3 .
2. Press A to move hands clockwise; press B to move hands counter-
clockwise .
3 . Return crown to position 1 .
7