Sauer Si-CPE320 Schnellstartanleitung Seite 4

7. First start-up
Welcome
Start Settings
Model: XXXXX - S/N: XXXXXX
Build: XXXXXXX - Version: 5.02
Tap ''Start settings''.
Channel con guration Set your Time
HOURS
+1
Please connect the probe(s)
before con guring the channel(s)
24 hours
Next
The transmitter is set. Set your time and tap
''Next''.
You can connect a
probe to set a channel.
8. Probe connection/disconnection
Connect a probe to the Si-CPE320 transmitter
b
a
Disconnect a probe from the Si-CPE320 transmitter
c
Languages
Skip
English
French
Spanish Italian
German Portuguese
Chinese
Next
Select your language
and tap ''Next''.
Set your Time Zone
MINUTES HOURS MINUTES
: 0 0 +1 : 0 0
UTC examples:
• Los Angeles: -8 winter, -7 summer
• New York: -5 winter, -4 summer
• London: +0 winter, +1 summer
• Paris: +1 winter, +2 summer
• Dubai: +4 • Beijing: +8 • Tokyo: +9
• Sydney: +10 winter, +11 summer
Next Next
Set your time zone
and tap ''Next''.
CLICK
Select Continent
Europe
Europe
Africa Northern
North America LATAM
Western
APAC
Rest Of Europe
Next
Tap your required
continent.
Set your date
Western
DAY MONTH YEAR
France
Netherlands
Austria
11 / 01 / 2021
YEAR / MONTH / DAY
DAY / MONTH / YEAR
Next
Set the date and tap Tap the required
''Next''. country then ''Next''.
• On the back of the transmitter, present
the probe connector (a) with its arrow
and padlock face to the transmitter
connector (b).
• Push in the probe connector (a) into the
transmitter connector (b) until you hear
a click. The probe is correctly connected.
• Turn the ring (c) of the probe connector
to the left.
• Pull the probe connector (a) away from
the transmitter connector (b).
b
a
Southern
Middle East
Tap the
required area.
Belgium
Germany
Switzerland
Next