Triumph JumpArena Round ø10ft Gebrauchsanweisung Seite 12

JumpArenA
Trampolines
Step 6
6
Door / Tür / Deur / Porte
Notice: During step6, you will "sew"
the lower edge of the Netting(6) to
6
the V-rings on the mat using the
Cords(8) Locate the V-ring closest to
the door. thread one end of a Cord(8)
through the lower eage of the net-
ting(6) above the V-ring and then
thread the cord through the V-ring.
Tie the Netting to the V-ring by mak-
ing a double knot in the cord.
Thread the cord(8) through the lower
edge of the netting(6) halfway be-
tween the first V-ring and the V-ring
8
to the left. and then thread the cord
through the V-ring to the left, Repeat
this procedure until the entire cord is
threaded through the netting and V-
6
ring as shown. keep the cord taut. Tie
the end of the cord to the last V-ring
that it reaches. Repeat this process
until all the cords are attached.
Tie a second cord(not shown) to the
last V-ring reached by the first cord.
thread the second cord through the
netting(6) and V-ring as described
18
above. Make sure that netting is sewn
to every V-ring on the trampoline
bed.
Congratulations! Your trampoline
enclosure is now fully assembled
(put together).
Make sure that all parts are securely
attached. Familiarize yourself and all
users with the trampoline and enclo-
sure with the safety precautions, use
and instructional materials, and care
and maintenance instructions in this
manual before using the trampoline
and enclosure.
12