Safety Instructions; Technical Data - EKVIP ADVENT STAR Übersetzung Der Originalanleitung

SAFETY INSTRUCTIONS

• Do not connect the light to the mains
while it is still in the pack.
• For indoor use only.
• Light sources sold separately.
• Check that no light sources are damaged.
• No parts of the product can be replaced,
or repaired. Do not use the product if any
part of it is damaged.
• Do not use sharp or pointed objects
during installation.
• Do not subject the power cord or wires to
mechanical stress.
• This is not a toy. Keep the product under
careful supervision when it is used near
children.
• Pull out the plug when the product is not
in use.
• Only use the product together with the
supplied mains adapter. Do not connect
the product directly to a power point.
• The product is not intended to be used for
general lighting.
• Recycle the product at the end of its useful
life in accordance with local regulations.
SYMBOLS
Class II.
For indoor use only.
Approved as per applicable
directives.
Recycle the product at
the end of its useful life
in accordance with local
regulations.

TECHNICAL DATA

Rated voltage
Safety class
Protection rating
Socket
Cord length
Size
INSTALLATION
FIG. 1–6
USE
1. Remove the product from the packaging.
2. Fit all the seals correctly.
3. Insert all the light sources.
4. Plug the plug into a suitable power point.
EN
230 V ~ 50 Hz
II
IP20
E14
1.5 m
Ø 45 cm
7