6. Wait for the firmware updater to update both the headset and the USB wireless adapter.
7. Once the update completes, click the OK button to close the prompt.
8. Reconnect the USB wireless adapter and pair the headset.
The Flight headset and USB wireless adapter should now be on the latest firmware.
II. Headset pairing
After you perform the firmware update, the headset and USB
wireless adapter will need to be paired together again before
use.
1. Turn off the headset.
2. Plug the USB wireless adapter into a PC.
3. Use a small pin to press the small button on the back
of the USB wireless adapter.
4. The USB wireless adapter LED will blink rapidly.
5. Long press the power button for 10 seconds to enter
pairing mode.
6. The headset ear cup LED will blink rapidly.
7. When the LED on the USB wireless adapter and the
headset ear cup is solid, pairing is completed.