Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Bluetooth
®
playback
Activate the Bluetooth
Power-ON the
blue) for more than 4 seconds, until the
activation of its BT function.
The
's BT now tries first to re-connect to the previous BT source. If your source was
previously connected to the
again.
If there is no previous BT source available, the
means search for a new BT source. New BT sources can be connected just within the first 2
minutes in this mode!
Now start the BT search function of your BT source device. After a moment,
"KidzAudio
"KidzAudio
Once the pairing has proceeded, the
indication. The Bluetooth connection is now protected against foreign BT sources!
In case of interruption of a BT connection through interference or too far distance, the playback
is muted and the blue indication will flash quickly again. Once the BT source can be received
again, the BT playback will continue.
To deactivate the BT function, select any other playback category and playback a content from
USB storage or power-OFF the device by turning the volume knob fully counterclockwise.
Headphones playback
Once
recognizes the plug in the headphones socket (12) the built-in speaker will be
deactivated.
Since
is a mono device, also the headphone playback is in mono. You can of course
use conventional stereo headphones with a 3.5mm stereo jack connection.
To finish the headphone playback, pull the jack plug out of the socket (12), the built-in speaker
will then be re-activated.
®
(BT) function of your Bluetooth audio source ("ON").
with the volume knob (10). Press on the Zzz/Bluetooth
by BT, the BT connection will be re-established instantly
" will appear in the BT listing of your BT source device. Select
" for connection (pairing) now.
English
shows a blue flashing LED to confirm the
continues quick blue flashing which
will confirm the BT connection by static blue
16
®
button (4,
Werbung
