cecotec CLEANFRY 3000 PROFILTER Bedienungsanleitung Seite 42

ENGLISH
the side of the container.
4. Screw the cap (16) back on top of the clean-oil container (15) (il. s).
5. Insert the clean-oil container (15) back into the appliance and turn the oil filtration knob
(14) to the lock position to secure the clean-oil container (15) in place.
Storing oil
- Do not store used cooking oil in the refrigerator.
- Choose a cool place that is not subject to sunlight.
- Generally, oil may be stored for a period of 3 months once the bottle is opened.
- Please observe the oil manufacturer's storage directions as well.
Tips
- Smaller quantities of food normally require a slightly shorter cooking time than larger
quantities of food.
- To reduce cooking time, defrost food prior to cooking. It is recommended that some foods
should not be thawed/defrosted prior to cooking, such as frozen fish or frozen French fries.
- It is recommended to use a meat thermometer to check the cooking progress.
- In the event of food flare-ups, do not remove the lid (3), do not remove the frying basket
(6); turn the temperature knob (23) to the 0 position and unplug the appliance.
- When the food you are cooking requires shaking, it is recommended to use a timer set for
half of the suggested cooking time. This way a bell will ring and remind you to shake the
frying basket (6).
- It is recommended to only use nylon, heat-proof plastic, or wooden cooking utensils. Metal
utensils may become hot and damage the non-stick surface. Always remove utensils from
the appliance. Do not leave the appliance unattended while it is operating.
4. CLEANING AND MAINTENANCE
- A proper cleaning of the device after each use will lengthen its service life. The appliance
contains no user serviceable parts and requires little maintenance.
- Always turn the temperature knob (23) to the 0 position before cleaning.
- Make sure no water enters the appliance housing (13) during cleaning.
- Do not attempt to remove the silicon rubber sealing plate (22).
- Ensure the clean-oil container (15) is in place, then turn the oil filtration knob (14) to filter
oil position to empty the oil tank (9) (see Oil filtration).
- Place the basket (6) on a clean, flat, and heat-resistant surface.
- Remove the basket handle (7) from the frying basket (6).
- Remove the control panel unit (21) from the oil tank (9). Carefully clean the control panel
unit (21) and heating element (21) with a damp cloth.
- Pull the oil filter cover (11) from the oil tank (9) and then remove the oil tank (9) from the
42 CLEANFRY 3000 PROFILTER