Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting
Warning of electrical voltage
Activities that require opening the housing
may only be carried out by authorized
be carried out by specialized companies.
The device was checked several times during production for proper functioning. If malfunctions
nevertheless occur, check the device according to the following list:
The device does not start:
•
Check the mains connection.
•
Check the power cord and power plug for damage.
•
Check the on-site mains fuse protection.
•
Wait 10 minutes before restarting the device. If the device does not start, have an electrical
check performed by a specialist company.
The surface of the device curves outward:
•
The material expands due to heating. This is a normal process. No measures are required.
The surface of the device heats up only slightly:
•
The mains voltage does not meet the requirements. Check the mains voltage.
•
The ambient temperature is low. This is a normal process. No measures are required.
The device makes noise after switching on:
•
The material expands due to heating. The insulation also expands and causes the noise. This
is a normal process. No measures are required.
Note
Wait at least 3 minutes after all maintenance and repair work.
Only then switch the device on again.
Your device does not work properly after the checks?
•
Pull out the mains plug!
•
Contact customer service. If necessary, take the device to an authorized electrical contractor
for repair.
ecoheat Thermo-T Manual | 91
Werbung
