ECOheat Classic-T 300 Bedienungsanleitung Seite 87

Wall mounting
When mounting the device on a wall, observe the minimum
distances to walls and objects according to the chapter
Technical data.
1. Position the bracket on the wall or ceiling.
2. Mark the 4 corner drill holes of the bracket on the wall
or ceiling.
3. Drill 8 mm holes in the wall or ceiling. Please use the
enclosed dowels and screws. The screws should
protrude approx. 0.5 cm from the dowels.
4. Use screws in the size of 6 x 50 mm
5. Hang the device in the holder and lock it by moving the
rotating lock so that it hangs securely
Removable wall mount
I
Dowel
Screws
II III
ecoheat Thermo-T Manual | 87