Kienzle Automotive TRC2425DAB+ Bedienungsanleitung Seite 13

CAUTION
Please avoid operating your connected mobile phone while audio streaming. This may cause
noise or sound choppy on the song playback.
Audio streaming may or may not resume after the telephone was interrupted. This dependents
on your mobile phone.
System will always return to Radio mode if audio streaming is disconnected.
Play / Pause a track
Push the [1] button to pause audio playback.
To resume audio playback, push the [1] button again.
Selecting a track
Press the [] button to move to the beginning of the next track.
Press the [] button to move back to the beginning of the current track. Press the button again to
move one track back.
Note:
Playing order will depend on Bluetooth audio player. When the [] button is pressed, some A2DP
devices will restart the current track depends on the duration of playback.
During music streaming playback, "A2DP and HFP" will be shown on the display. When A2DP device
is disconnected, "BLUETOOTH DISCONNECT" will be shown on the display. Some Bluetooth audio
players may not have play / pause synchronized with this unit. Please make sure both device and
main unit are in the same play / pause status in BT MUSIC mode.
TUNER OPERATION
Band
During radio play, press the [BAND] button to choose between 3 FM and 1 MW bands.
Up Tuning
Press the [] button to select the next available station.
Press and hold the [] button to tune the frequency upward step-by-step
Down Tuning
Press the [] button to select the previous available station.
Press and hold the [] button to tune the frequency downward step-by-step
Auto Store
Long press the [BAND] button to scan preset stations. Hold it to automatically select stations and
store them in the current band. The new stations replace stations already stored in that band.
Store and select Stations
Press the [1] – [6] button more than 2 seconds to store the current station.
Press the [1] – [6] button briefly to select a preset station
13