Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BLUETOOTH OPERATION
This system can play audio data stored on a Bluetooth audio device. The car stereo with Bluetooth will
be able to dial numbers, answer incoming calls and listen to music stored on the Bluetooth device.
Note:
Do not leave the microphone of Bluetooth handsfree in the places with wind passing such as air
outlet of the air conditioner, etc. This may cause a malfunction.
If you leave it in the places subjected to direct sun, high temperature can cause distortion,
discoloration which may result in a malfunction.
This system will not operate or may operate improperly with some Bluetooth audio players. We
cannot guarantee the compatibility of all mobile phones together with the unit.
Audio playback will be set to the same volume level as set during telephone call. This might cause
problems, if extreme volume level is set during telephone call.
Handsfree Operations
Pairing
1. Turn on Bluetooth function of your mobile phone.
2. Enter mobile phone's Bluetooth setup menu.
3. Search for new Bluetooth devices.
4. Select CR1225DAB+ from the pairing list on the mobile phone.
5. Enter "1234" as the password
(The password default setting is "1234").
6. After pairing successfully, BT and HPF icons will light up. A2DP icon will light up after A2DP
connected.
You have to be in Bluetooth mode (A2DP) to use the following functions.
Making a call
Long press the [] button to switch the source to "DIAL NUMBER
Press the [OK] button to start dialing
Rotate the [volume knob] to select a digit.
Press [OK] to confirm the selection and enter the next digit. Repeat the above until all numbers are
inputted.
Press the [] key to dial.
Press the [] button to end the call.
Audio Streaming Operations
What is A2DP?
A2DP is a vendor-independent technology that allows you to send stereo audio signals wirelessly via
Bluetooth to the radio.
12
Werbung
