Lindy 38368 Benutzerhandbuch Seite 3

User Manual
Name Function
eARC This switch is used to turn off/on the eARC function. "ON" position, the Out2 port will
switch output the eARC/ARC audio; "OFF" the Out2 port will output audio from the HDMI IN port.
This switch is used to select EDID: "OUT1" position will take the audio EDID block from
EDID the display connected to OUT1; "OUT2" position will take the audio EDID block from the
switch display connected to OUT2. Video EDID block will always be taken from OUT1. If the
copy fails, the unit will use an internal EDID of 1080p 2Channel audio.
Troubleshooting
▪
No signal: Please ensure that all cables are connected.
▪
No audio: Please ensure that the correct dip switch has been selected.
▪
No audio: Please make sure that you have connected your HDMI cable to the eARC/ARC on the
display.
English