Lindy 38368 Benutzerhandbuch Seite 2

User Manual
Introduction
Thank you for purchasing the 4K HDMI eARC extractor. This product has been designed to provide trouble
free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support.
To ensure correct use, please read this manual carefully and retain it for future reference.
The Lindy 4K HDMI eARC Extractor allows users to seamlessly extract digital audio from an HDMI Source
or HDMI eARC displays, while sending the video signal to a 4K UHD display. This is a perfect solution for
separating audio signals too your AV Receiver or sound bar.
Package Contents
▪
1x 4K HDMI eArc Extractor
▪
1x USB Cable (USB A to Micro USB)
▪
1x User Manual
Features
▪
Extracts stereo or multi-channel audio
▪
CEC and high bit rate audio
▪
Supports resolutions up to 4096x2160@60Hz 4:4:4 8bit / 4:2:2 12bit
▪
Supports HDR formats: HDR10, HDR10+ and Dolby Vision
▪
Supports HDCP 2.2
Specification
▪
Maximum supported audio sample rate: 192KHz
▪
Input impedance: 100Ω
▪
Output impedance: 100Ω
▪
Output voltage: 5V 1A
▪
Power consumption: 2W
Installation
1. Ensure all devices are powered off before connection. Once the USB power cable is connected
the Power LED will illuminate.
2. Connecting the following HDMI cables
a. Out1: Connect a HDMI cable to your HDMI eARC port on the display.
b. Out2: Connect a HDMI to your Sound system (AV Receiver or soundbar).
c. Input: Connect a HDMI cable to your required source device.
3. Configure the dip switches on the unit to control EDID and audio extraction.
English