Tru-Test ERS EID Schnellstartanleitung Seite 7

Getting sessions off
7
Session files can be transferred from the EID reader to a PC using the Data Link
software application.
Note:
Do NOT connect the EID reader to the PC until you have installed the Data Link
software.
Before you can transfer information from the EID reader to a PC, you must first install
Data Link on the PC. To do this, insert the USB flash drive into a USB port and follow
the instructions.
To transfer information from the EID reader to a PC:
1 Connect the EID reader to a PC using the USB cable supplied.
2 Launch the Data Link application.
3 Wait for the EID reader to connect to the PC (this may take up to a minute).
7