Werbung
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap Continue.
You will receive a verification code on your e-mail address.
4
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with
and tap Done.
Adding a product to the Nedis SmartLife app
1. Press the on/off switch A
w
2. Press and hold the oscillation/Wi-Fi button A
The Wi-Fi indicator C
5
blinks fast and a beep sounds to indicate
4
pairing mode is active.
3. Tap + in the Nedis SmartLife app.
4. Select the product type you want to add from the list.
5. Follow the instructions in the Nedis SmartLife app.
6. After confirming you can control the product with your
smartphone.
To connect your SmartLife account to Amazon Alexa and/ or Google
Home, set it up using the "Smart Life" action or skill. For more details
check the instruction on either Amazon or Google.
The Wi-Fi indicator C
5
lights up when the product is connected.
4
Switching on the product
1. Plug the power cable A
r
2. Press the on/off switch A
w
The product is now in standby mode. The display shows the
4
current room temperature C
3. Press the on/standby button A
and on.
When the product is switched on (after a long period of time),
4
the product may emit some smell and fumes.
Display (image C)
The display A
contains the following:
3
Fan indicator
1
2
Low power indicator
3
High power indicator
Current room temperature
4
Switching between power settings
1. Press the mode button A
7
2. Choose between:
• Low power mode
• High power mode
The low power indicator C
4
2
in low power mode.
The low and high power indicator C
4
product is in high power mode.
Setting the timer
1. Press the timer button A
9
2. Press the timer button A
9
The maximum countdown time is 12 hours.
4
3. Switch off the timer by pressing the timer button A
when the time is set to maximum.
The timer is cancelled when the product is switched off.
4
Setting the temperature
1. Press the temperature up and down buttons A
the set room temperature.
When the room temperature reaches the selected level, the
4
built-in thermostat automatically switches off, the fan remains
working.
to switch on the product.
8
for 3 seconds.
into a power outlet.
to switch on the product.
4
.
6
to switch between standby
Wi-Fi indicator
5
6
Timer indicator
7
Unit indicator
to switch between power settings.
lights up to indicate the product is
23
light up to indicate the
to set a countdown timer.
to increase the timer with 1 hour.
9
once more
54
to adjust
When the room temperature decreases, the built-in thermostat
4
automatically switches the product back on.
Switching the oscillation on/off
1. Press the Wi-Fi/oscillation button A
on/off.
Overheat protection
The product switches off automatically in case of overheating, e.g.
due to the total or partial obstruction of the air inlet or the air outlet
grid. After overheating, allow the product to cool down for at least
30 minutes before using it again.
Switching off the product
1. Press the on/standby button A
standby mode.
2. Press the on/off switch A
The Wi-Fi switches off.
4
Wait 1 minute before proceeding with the next step to allow the
4
product to switch off completely.
3. Unplug the power cable A
Disposal
The product is designated for separate collection at
an appropriate collection point. Do not dispose of the
product with household waste.
For more information, contact the retailer or the local
authority responsible for the waste management.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product
HTFA22WTW from our brand Nedis®, produced in China, has been
tested according to all relevant CE standards and regulations and
that all tests have been passed successfully. This includes, but is not
limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via:
nedis.com/HTFA22WTW#support
c
Kurzanleitung
WLAN-Smart
Keramik-Heizlüfter
Weitere Informationen finden Sie in der erweiterten
Anleitung online: ned.is/htfa22wtw
Bestimmungsgemäße Verwendung
Dieses Produkt ist eine Heizung, die dem Benutzer die Kontrolle der
Umgebungstemperatur ermöglicht.
Dieses Produkt kann über die Nedis SmartLife-App, die Tasten am
Produkt oder mit der mit der mitgelieferter Fernbedienung bedient
werden.
Dieses Produkt ist nur für gut isolierte Räume oder für den
gelegentlichen Gebrauch geeignet.
Das Produkt ist nur zur Verwendung innerhalb von Gebäuden
gedacht.
Das Produkt ist zur Verwendung in Haushaltsumgebungen
für typische Haushaltsfunktionen gedacht, die auch von nicht
fachkundigen Benutzern ausgeführt werden können, wie z. B.:
in Geschäften, Büros und ähnlichen Arbeitsumgebungen,
Bauernhäusern, von Kunden in Hotels, Motels und anderen
Unterkünften und/oder in Pensionen.
Dieses Produkt ist nicht zur Verwendung durch Personen
(einschließlich Kinder) mit eingeschränkten körperlichen,
sensorischen oder geistigen Fähigkeiten oder ohne ausreichende
6
8e
to switch the oscillation
6
to switch the product to
to switch off the product.
w
r
from the power outlet.
HTFA22WTW
Werbung
