Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Rear connection panel
① Power supply
socket
If you do not want to use batteries, the instrument can be operated via an external power
supply unit (not included).
Operate the instrument only with power supplies that have the correct performance data.
These are: 5VDC min. 1000mA.
First connect the micro-USB plug of the charging cable to the power supply socket on the
instrument. Then connect the power supply unit to the power socket.
② Microphone
A dynamic microphone with a 3.5mm mono jack can be connected to the MIC input of the
keyboard.
Make sure that the volume setting is appropriate. If the volume is too high or the distance
between the microphone and the speaker is too small, feedback may occur. Remove the
microphone from the microphone jack when not in use to avoid unwanted background noise.
③AUX IN
The Aux In jack is used to connect external sound sources, such as an MP3 player.
④ Phones
Connecting a headphone to this 3.5mm jack disables the instrument's speakers.
Ensure that the volume setting is appropriate. Too high a volume or using headphones for
too long can cause hearing damage.
6
Werbung
