Intended Use; Safety Informations - Bgs Technic 9347 Bedienungsanleitung

CONTENTS
1 Spiral drill
2 Thread tap M10x1.25
3 Brake caliper guide bolt (x10)
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

The tool set is used for repairing faulty inner threads for brake caliper guide bolts in wheel bearing
housings / brake caliper carriers. This often helps to avoid customer complaints about high costs
caused by wheel bearing replacement. There is no longer any need to remove the wheel bearing and
strut and then align axles either. The guide bolts are suitable for VAG, Ford and Opel.

SAFETY INFORMATIONS

•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc..
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Guide Bolt Repair Set
for Brake Calliper Carriers
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9347
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed