Citizen IF5-ES04 Schnellinstalationsanleitung Seite 13

The program is started with the usual methods of your operating system.

The program automatically searches for devices on the network after
starting.
Detailed information on how to use the Smart Product Manager can be found
in the Online Help. To start the online help, go to the menu bar and select
Help – Online Help.
Finding the Print Server (Determining the IP Address)
All print server found in the network are displayed in the device list.
If the print server has received an IP address via the boot protocols BOOTP or
DHCP, you can identify it with the help of it's type designation. If you are using
several print servers of the same type, identify the print server using it's
hardware address. You can find it on the status page. To print a status page,
press the button on the print server for a short time. You can change the IP
address using the print server homepage; see: 'Changing the IP address'
13.

If the print server has assigned itself an IP address via Zeroconf from the
address range (169.254.0.0/16) which is reserved for Zeroconf, assign a new IP
address to the print server; see: 'Changing the Zeroconf IP address'
Changing the IP address
Make sure that:
The Smart Product Manger is installed and running;

The print server whose IP address is to be changed is displayed in the

device list.
Proceed as follows:
1. Select the print server in the device list.
The user interface of the print server home page appears on the right side of
the Smart Product Manager.
2. Select the TCP/IP menu item under Configuration in the navigation bar.
The TCP/IP dialog appears.
3. Change the IP address.
4. Confirm the entry with Save.
The IP address is changed.

Quick Installation Guide [en]

12.

14.
13