OSRAM BATTERYtest PRO 600 Bedienungsanleitung Seite 9

BATTERYtest PRO 600 | Multi-function Automotive tester OMM600 | 12V / 24V
Voltage Measurement - Average Volt
Direct
current
0.0 V ~ 3.9 V – Normal display
4.0 V ~ 4.5 V Sensor Volt (Low)
4.6 V ~ 6.0 V Sensor Volt (OK)
6.1 V ~ 7.5 V Sensor Volt (On high side)
7.6 V ~ 12.2 V Sensor Volt (High)
12 V Battery Volt (Low)
12.3 V ~ 12.5 V 12 V Battery Volt (Marginal)
12.6 V ~ 13.5 V 12 V Battery Volt (OK)
13.6 V ~ 13.9 V 12 V Alternator charging Volt (Low)
14.0 V ~ 14.9 V 12 V Alternator charging Volt (Normal)
15.0 V ~ 15.5 V 12 V Alternator charging Volt (High)
15.6 V ~ 17.5 V 12 V Smart Alternator charging Volt (Normal)
24 V Battery Volt (Low)
17.6 V ~ 24.6 V 12 V Smart Alternator charging Volt (High)
24 V Battery Volt (Low)
24.7 V ~ 25.0 V 24 V Battery Volt (Marginal)
25.1 V ~ 27.0 V 24 V Battery Volt (OK)
27.1 V ~ 27.9 V 24 V Alternator charging Volt (Low)
28.0 V ~ 29.9 V 24 V Alternator charging Volt (Normal)
30.0 V ~ 31.0 V 24 V Alternator charging Volt (High)
31.1 V ~ 35.0 V 24 V Smart Alternator charging Volt (Normal) Ignore
35.1 V ~ 37.5 V 24 V Smart Alternator charging Volt (High)
≥ 37.6 V – Normal display
Voltage Measurement - Peak Volt
Direct
current
> 50.00 Vdc
9
–
Check sensor connection
–
Refer service manual
Sensor: Refer service manual; 12 V Battery: < 10.6 V: Replace;
> 10.7 V: Recharge and test
Recharge Battery
–
Check Alternator, loose belt, etc.
–
Normal Alternator: Check Regulator
Smart Alternator: Ignore
24 V Battery: Replace
Check Alternator / setting; 24 V Battery: < 21.2 V: Replace;
> 21.3 V: Recharge and test
Recharge Battery
–
Check Alternator, loose belt, etc.
–
Check Regulator
Check Alternator / setting
–
ENTER
• Reversed bias
• Negative volts
> 50.00 Vdc
ENTER
ENTER
ENTER