Assembly Process - Create PATIO HEATER LAMP Bedienungsanleitung

• Do not use this unit as a sauna heater.
• Do not use this unit as a space heater.
• Do not use this unit in animal propagation and breeding places.
• Do not immerse this unit in water to clean it.
• The unit should be plugged in where it is easily visible and accessible.
• There may be two dark spots on the surface of the heating elements during the
first few minutes after power on. This is normal and will not affect the performance
of the unit.
• A tilt switch is installed inside the unit for safety reasons.
1
1. Connect the central tube parts to the central body of the product by screwing them
together.
2. Put the cover through the down tube and then attach the rest of the product body by
screwing it.
E NGL I SH
8

ASSEMBLY PROCESS

2
Cover