Xoro HTC 2240 HD Bedienungsanleitung Seite 91

There appears a window showing "channel Scan" upon pressing the BLUE button on the manu of the
Satellite Setting.
On this Window you can make three entries to affect the scan result.
Search Mode:
Standard: The receiver scans channels according to a pre programmed list. This search
process goes fast without being able to find programs on new transponders.
Blind search: The receiver scans every possible frequency. It takes a little bit more time than
standard scan. However it is possible to find programs from unknown transponders.
Network: The receiver scans channels according to a pre programmed list. The frequency of
a new transponder could be found out through analysis of the known transponders. The scan
process is shorter than "blind scan", but there might be possibly missing programs.
Please employ "Blind Scan". It takes a little bit longer, but will result in a complete program
list.
If you have added a new satellite on the menu of Satellite Setting, please employ "Blind
scan", for there is no transponder list available for the newly added satellite. There is no "Blind scan"
option in case of UniCable system.
Program Tpye:
All programs: both free and encrypted programs (Pay TV) will be added to the program list
during the channel scan.
FTA (free): The channel scan saves only free programs.
Service Type:
All: The channel scan saves both TV and Radio programs.
Digial TV: The channel scan saves only TV programs.
Radio: The channel scan saves only Radio program.
Polarisation:
Auto: searches both horizontal and vertical positioned broadcasters (recommended)
H: searches only horizontal positioned broadcasters
V: searches only vertical positioned broadcasters
Press the OK button to start the Channel scan.
After the channel scan is completed, live picture of the first found channel will be shown on the
screen.
Initial Installation
ENG21