Xoro HTC 2240 HD Bedienungsanleitung Seite 90

Notes:
After you have set up the chosen satellite, a rough estimation of the signal strength will
be shown on the lower part of the menu.
If a satellite is missing on the list, press the RED button. A dialogue winter appears, input
the value for Longitude, East/West and frequency, and name the new satellite. If you
have added a new satellite, please choose "Blind Scan" in the coming channel scan. If
you add a satellite to the list, there will be no display of the signal quality for this satellite,
in spite of correct setting. Signal quality could only be displayed for satellites saved under
the transponder list.
Add new transponder with the RED button. Alternatively select the "blind scan" to seach
for new broadcaster.
Antenna Setting– Explanation of the parameter
LNB Typ: define the oscillator frequency for your LNB . Please take the correct value from
themanual of your LNB (standard:09750/10600)
LNB Voltage: This parameter defines the storm voltage of the antenna, and signal from
horizontal or vertical polarized transponder will be received. The setting will only have to be
changed in very rare cases. A false setting will result in missing program or no signal reception at
all. (standard: On)
22KHz: The receiver can switch the LNB with 22 KHz signals for the reception of another
frequency band. The setting will only have to be changed in very rare cases. A false setting will
result in missing program or no signal reception at all. (standard: Auto)
Toneburst: Tone burst switcher has two input ports, enabling the connection of 2 antennas or
LNB to the receiver. If you have a Tone burst switcher, you will have to select one of the both
connections (A or B) for the satellite chosen on the left side.
DiSEqC: DiSEqC switcher has up to 16 input ports enabling the connection of multiple
antennas or LNB to the receiver. If you have a DiSEqC switcher, you will have to select one of
connections for the satellite chosen on the left side. Please check which version (1.0, 1.1) could
be supported in the manual of your switcher.
Motor: Rotatable Antennas require extended configurations.
professional installation from a technician. Please set up according to your antenna. You can
open further set up windows with the RED and the GREEN button.
After the set up has been done for all reachable satellites, please press the BLUE button to open
the menu for channel scan.
ENG20
Initial Installation
We recommend