Xoro HTC 2240 HD Bedienungsanleitung Seite 108

Main Menu
Press the MENU button to access the main menu.
Navigate with or
categories: Channel, Picture, Sound, TIME, OPTION and Lock. The
highlighted category will be displayed together with the first page of
its sub menu.
You can enter a category by pressing
with or on the sub-menu to mark an option and Press OK or
the input.
Press MENU to go back a level higher on the menu. Press EXIT to quit the menu.
Channel
The channel settings includes the options for Auto Scan, DTV Manual Tuning, ATV Manual Tuning,
Programme Edit, Signal Information, Software Update, Start Record, Recorded List, Timer
Programming, Timer List and PVR File System
Auto Scan
With this setting you can search the TV broadcast station for DVB-T, DVB-C, DVB-S and analogue
cable TV. You will be asked to input a password. The default password is 0000. Please refer to the
detailed description on page 18.
Notes:
If you have selected "Cable", you will be offered to make further settings as "search
method", "Frequence", "Network ID" and "symbol". Please change the settings only if you
are required by your cable supplier. Otherwise please leave "Full" for "Search method" and
"Auto" for "Symbol".
A simplified search run is offered for Satellite. Please select the correct satellite before
starting the search run. If the search result is not satisfying, please run the channel scan
with the menu Antenna Settings.
Antenna Settings
This menu is only active if you have pressed INPUT button and chosen "Satellite" as source.
Please refer to page 19 for detailed information.
DTV Manual Tuning
You can search DVB-T, DVB-C and analogue programs after the
inputted parameters. For DVB-S signals, please carry out the manual
tuning with the menu " Antenna Settings".
ENG38
on this main menu consisting of following
or OK, moving the cursor onto the sub-Menu. Navigate
Settings
Main Menu
Sub-Menu
to open a further window for