Teleco TSP 100W Montageanleitung Seite 24

Solar Panel Components (Fig.2)
No. Quantity Description
8 1 TELECO TSP 100W Mono-Crystalline Solar Panel
(L=1195mm; W=550mm; H=40mm)
9 6m
2x2.5mm
FIG. 2
H
8
9
Caution
Before starting the installation operations, make sure that the package contains all the
required components. Follow the installation instructions carefully!
For the maximum roof carrying capacity, please refer to the vehicle
manufacturer specifications.
The installation should be carried out by skilled personnel; ensure that cable cross-
sections are as prescribed.
Installation should be carried out in compliance with the technical and/or administrative
standards in force in the country of use (e.g. EN1648).
The solar panel and its components should not be installed near flammable products
or items (e.g. gas bottles).
A solar panel will generate electricity: do not touch the panel's conductive parts, not
even under low brightness conditions.
Before starting the system, ensure that the installation operations have been carried
out in a workmanlike manner.
Ensure that the components have been correctly fastened and are still tight after travelling
on uneven, bumpy roads.
2
PV cable with MC3 plugs
A
2
L
GB