SwitchBot W1001000 Benutzerhandbuch Seite 6

Stick on Your Curtain
If the solar panel cannot receive direct sunlight due to its position, you can use the buil-
in cable to connect the solar panel and SwitchBot Curtain. You can also use the doubles
sided tape and magic tape to stick onto the bac of you curtain.
Open the case at the back and take out the cable.
Firmly stick 3 pieces of magic tape with double sided
tape on the back of the solar panel and wait for 5
hours for optimum adhesion.
Put another piece of magic tape with double sided
tape onto the back of your curtain, make sure to do
the two steps below:
1. Expose under direct sunlight and 2. Confirm its
distance to be less than length of SwitchBot
Curtain´s cable, wait for 5 hours to achieve optimum
adhesion.
Stick the solar panel onto the curtain and connect
the cable properly.
6