Comfast WR302S Benutzerhandbuch Seite 5

1. Please select a WiFi that
you want to extend (if no WiFi
signal is available, please click
the Scan button again).
Description
More functions (eg: AP mode, router mode), please link up the device with a PC, connect
it to the WAN port of the PC with the included internet cable and enter the IP address
192.168.10.1 to website entry, you can access the PC settings page there.
3. Common Problems
Q: Why can I not surf the internet after setting up the product successfully?
A: Please check whether the password was input correctly. If not, please enter the
correct password.
Q: Why is the network speed is very slow after setting the device up successfully?
A: Please enter the device status page to check whether the "Equipment and the main
AP distance" is fit. If not, you can adjust the position of the repeater.
How to check the status page: after connecting to the extended WiFi successfully, you
can enter the IP address 192.168.10.1 on your mobile's browser or on PC to check the
status of the repeater.
Note: Please make sure that the IP address from the upper network is not 192.168.10.1.
For more questions, please visit our main page: www.szcomfast.com
2. Please enter the WiFi
password from your router
and click connect. (Default
new WiFi name).
5
3. Extension was successful,
please wait 1 minute to
complete the resetting
process and connect the WiFi
again, you can now browse
the internet.