Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting the Power
1. Plug the AC power cord into the power port on the back panel of the Network Packet Broker.
2. Connect the other end of the power cord to an AC power source.
WARNING:
Do not install power cords while the power is on.
Connecting the QSFP28 Ports
1. Plug the compatible QSFP28 transceiver into the QSFP28 port.
2. Connect a fiber optic cable to the fiber transceivers. Then connect the other end of the cable to
other fiber devices.
6
Werbung
