Motion Computing Mobile Installationshandbuch Seite 18

this example.) If the keyboard is not found in a minute or so, tap
"Cancel Search." Then reset the keyboard by repeating Step 5 and tap
"Search Again" button.
5. Start the Pairing Process
A. From the Bluetooth Security
Setup window, tap the Initiate Pairing
button. (Some fields gray out and the
cursor changes to an hourglass,
indicating that Bluetooth is ready to
accept a PIN code and pair the
devices.)
B. From your Bluetooth keyboard,
immediately type the seven-digit
number shown in the PIN-Code field.
C. Press the Enter key on the
Bluetooth keyboard to initiate pairing. (It may take a minute or
two for the devices to pair. Please wait.) When the Bluetooth
Service Selection window appears, pairing is complete.
NOTE: A message may appear that the PIN Code entry has timed out.
Tap the Back button and repeat Steps 5, (skip Step 6), 7 and 8. A new
PIN code is generated each time you restart the pairing process.
6. Bluetooth Service Selection
A. From the Bluetooth Service Selection window, verify that
"Human Interface Device Service" is checked.
B. Tap Finish to complete the installation.
Microsoft Windows now installs services for your keyboard.
This may take a few seconds. Please wait until this process is
complete before installing any other Bluetooth devices.
7. Take Your Keyboard for a Spin
You can now begin using your Mobile Bluetooth Keyboard.
12