Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Maintenance
Gaskets and vermiculite panels are wearing parts which need to be replaced from time to time – depending
on how much you use your stove. In some cases, you may need to replace them every year, while in others,
replacement every second or third year will suffice. As a rule of thumb, gaskets need to be replaced when
it has become flattened and the door no longer fits tightly against the front of the stove. You can purchase
gaskets – with adhesive – from your local dealer.
The Vermiculite panels must be replaced when they have worn thin, or when cracks – if any – become so
wide that you can actually see steel through them. If the panels are not replaced at such time, they will lose
their capacity to insulate and reflect heat.
We recommend that you use original spare parts.
Movable and mechanical parts (closing mechanisms, hinges etc) should be greased once a year with a
heat-resistant lubricant.
You should have your stove checked regularly by a qualified professional to ensure the optimal function of
the stove at all times. Do not make any unauthorised changes to the design of the stove. Not only is this
illegal, but it will also invalidate the stove guarantee and test results.
Replacing the gasket on the door
1.
Remove the gasket from the inside edge of the door and clean the sealing track (there is no need to
remove the door from the stove).
2.
Apply a layer of fire-resistant adhesive to the track where the old gasket was affixed.
3.
Press new gasket into the track.
4.
Close the door and let the adhesive set for approx. 1 day before opening the door again. If the adhe-
sive has not hardened sufficiently before the door is opened again, the gasket may fall out.
Replacing the gasket on the Glass
1.
Open the door.
2.
On the inside of the door, in each corner of the glass panel, there is a fastening that must be loosened
so that each fitting can be turned away from the glass panel.
3.
Repeat this procedure for all the fittings and remove the glass panel.
4.
Remove the old strip from the glass panel.
5.
Fit a new gasket around the glass panel.
To replace the glass panel, simply reverse the process described above.
Interior cleaning
It must always be possible to access the chimney for sweeping/cleaning.
18
Werbung
