ATA B4728/31 Bedienungsanleitung Seite 33

14. The machine control wiring has two black sheaths that contain the drain pump push-button and
warning lamp electrical connection wires. Cut the clamps that secure the sheaths to the wiring
and remove the two sheaths to pull out the wires marked by the 8, 23, 7 and 24 numbers.
15. Remove the back section of the blind push-button on the control panel by keeping the black frame
in its seat. Then, insert the supplied drain switch (5) into the black frame from the back, pushing
it until it clicks into place. Finally, return the silver push-button on the push-button body from the
front, checking that it correctly snaps into place. You can re-use the dishwasher original silver
push-button and black frame if they have not been damaged during disassembly operations.
Otherwise, use the supplied spare parts.
32