Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Open the appliance's doors according to your needs. Avoid unnecessary use.
Do not place your appliance near heat sources such as radiators, ovens or under direct sunlight.
Do not fill at once your appliance with big quantities of products, because this will increase energy
consumption.
Malfunction
Possible cause
The appliance
There is ice accumulation in the evaporator.
does not cool
The stocked products are obstructing the air
flow.
The ambient temperature is very high.
Ice in the
The temperature adjustment is very low.
evaporator
High humidity environment.
Humid products have been placed in the
refrigerator (ex. Vegetables).
The doors are opened frequently and for a
long time.
Water in the
The drainage pipe is blocked.
appliance
Condensation tray overflow (positive
uprights).
8
Saving energy advices
9
Troubleshooting
Solution
See "Ice in the evaporator" below.
Remove the products which obstruct the air flow of the
evaporator.
Improve the temperature condition of the room.
Check the temperature adjustment.
Increase the temperature setting.
Improve the environment condition. Increase the
defrost frequency.
Change the parameter FFu to continuous function
(evaporator fans).
Cover the food with a plastic film before storing it in the
refrigerator. Increase the defrost frequency and
duration.
Minimize the time the doors remain open.
Clean the drainage pipe and the drain siphon funnel.
Change the parameter FFu to continuous function (tray
heater).
16
ENG
Werbung
