Herunterladen Diese Seite drucken

LightPro Polaris Bedienungsanleitung Seite 8

Werbung

Polaris
User manual
Thank you for purchasing the Lightpro Polaris.
This document contains the required information for
correct, efficient and safe use of the product. Consult the
user manual of your transformer for more information
about the installation and connection of your lighting
plan or visit our website www.lightpro.nl
Read the information in this manual carefully before
using the product. Keep this manual near the product for
consultation in the future.
PRODUCT DESCRIPTION
The Lightpro Polaris is an LED wall lamp for outdoor use.
The fixture can be mounted on a solid surface or placed
in the ground with the supplied spikes. This product may
only be used as outdoor lighting in combination with
the Lightpro 12-volt system. Any alterations made to the
product may have consequences for the safety, guarantee
and correct functioning of the product and/or other parts
of the system.
SPECIFICATIONS
Product
Article number
Light source
Power (max)
Luminous flux (max)
Light colour
Average lifetime
Dimensions (H x Ø)
Protection class
Ambient temperature
Cable length
Dimmable
Light source
On/off
PACKAGING CONTENT
[Figure A]
1. Fixture Polaris
2. Screws
3. Plugs
4. Lightpro connector
Check if all parts are present in the packaging. For
questions about parts, service, and any complaints or
other remarks, you can always contact us.
E-mail: info@lightpro.nl.
Lightpro Polaris
185W
LED 6W AC/DC 12V
6W
500 lm
3.000K
25.000 Hour
35 x145 mm
IP44
-20 °C to 50 °C
3m
No
Not replaceable
10.000
INSTALLATION
[Figure B]
1. Unscrew the cap from the back plate.
2. Remove the cap from the fixture.
[Figure C]
Optional: Putting the cable through the wall.
1. Drill a hole (Ø10 mm) in the wall for the cable.
2. Open the screw connector in the cable.
3. Put the cable through the hole in the wall.
4. Connect the screw connector in the cable.
[Figure D]
1. Install the back plate with the included screws.
If necessary, drill holes in the wall and use the included
plugs.
2. Place the cap on the back plate.
3. Fix the cap by fastening it into place.

Werbung

loading

Diese Anleitung auch für:

185w