Maintenance, Cleaning And Repair - Konig & Meyer 19751 Nutzungsinformation

Maintenance, cleaning and repair

u Maintenance: Regularly check if the screw connections are tight.
u Cleaning: Use a slightly damp cloth to clean the smartphone holder. Do not use chlorinated
u
or abrasive cleaning agents. These will cause damage to the surface and varnish.
u Repair: Immediately repair any damage that occurs and stop using the smartphone holder.
u
Repair work may only be carried out if you have the necessary knowledge for this. For missing
u
parts, contact the manufacturer at www.k-m.de. Here you can find a corresponding spare parts
u
list by entering the article number on the type label. Use this page to reorder missing or
u
damaged components.
Fault and troubleshooting
Fault/cause
Smartphone holder
wobbles
Smartphone wobbles
in the holder
Storage, disposal
Store the smartphone holder in a dry and dust-free place.
Recycle disassembled components:
u Scrape all components made of metal.
u Recycle or reuse all plastic, paper, and cardboard components.
u Sort all other components according to material composition and dispose of them
u
according to local regulations.
Kontaktinformation
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Phone: +49 9342/8060
Fax: +49 9342/806-150
E-Mail: contact@k-m.de
Web: www.k-m.de
19751-000-55 Rev.02 03-80-062-00 8/23
Check/Remedy
● Check the stability and screw connection of the used stand.
● Check the screw connections on the smartphone holder and
● tighten if necessary.
● Check whether the clamping lever on the smartphone holder is
● engaged.
● Smartphone must lie flat against the back and in the retaining
● tabs.