M-Neb vet ultrasonic Gebrauchsanweisung Seite 16

Operating Manual of M-neb
Activation of inhalation
8. Activation of inhalation – intermittent mode
In order to activate the inhalation process press the on/off button for at least
1 second. The M-neb
hear a short acoustic signal and the capacity display is glowing green
continuously. You have now entered the intermittent mode (1 second active /
1 second passive). The green LED is glowing continuously, the blue LED
flashes alternately.
How to change the operating mode
9. How to switch to the continuous mode
Press the on/off button again shortly to switch to the continuous mode.
A continuous nebulization takes place until the inhalant is completely
nebulized. The green and blue LEDs are glowing permanently.
You can return to the intermittent mode by pressing the on/off button again.
NTI_HM-300_IFU-DE-EN_2
®
vet ultrasonic nebulizer
®
vet ultrasonic nebulizer turns on automatically. You will
On/off button of the M-neb
ultrasonic nebulizer
®
vet
16