neno Lindo Bedienungsanleitung Seite 12

pouch or jar of food and replace the lid. Press the defrost function button
and set the temperature between 25°C-40°C, the default temperature
is 35°C. After 30 minutes, the appliance will go into a 40°C keep warm
state. If you want a constant temperature use the Milk Warm-up mode.
When heating is complete, press the power button or defrost again to
put the unit into sleep mode or unplug the steriliser.
• Sterilisation: Pour in the correct amount of water according to the select-
ed programme, then place the bottles on the bottle holder and insert
into the machine. SEE FIG B Press the disinfection function button and
select one of the three modes using the "+" and "-" buttons.
1. Mode for plastic bottles, pour in 100-120 ml of water. Duration: 18
minutes, the machine heats the water for 15 minutes and the next 3
minutes allow the machine to cool down gently.
2. Mode for silicone bottles and accessories, pour in 100-120 ml of wa-
ter. Duration: 20 minutes, the device heats the water for 17 minutes
and the next 3 minutes allow the device to cool down gently.
3. Mode for glass bottles, pour 120-150 ml of water. Duration: 25
minutes, the machine heats the water for 22 minutes and the next 3
minutes allow the machine to cool down gently.
• Heating food: Pour in between 100 and 200ml of water, insert the
bottle holder with the tabs to the underside of the FIG C, then insert the
bottle, pouch or jar of food and replace the lid. Press the food warming
function button and set the temperature between 65°C-75°C, the default
temperature is 70°C. When finished heating, press the power button or
reheat the breastmilk for the unit to go to sleep or unplug the steriliser.
• Timer switch: select one of the functions, set the temperature or mode
and then press the "Timer" button. Set the time between 30 minutes
and 24 hours. The heater will illuminate the set time three times and
then start counting down. The unit 30 minutes before the end of the
time will stop displaying the time and will start heating so that the food
is ready after the time set on the warmer. Please note that the appli-
ance will not switch off on its own, use the off/sleep button to end the
warming process.
• Night light: You can use the light in both sleep and working modes. Press
the lamp button to switch the lamp on. Pressing again will switch the
lamp off after 30 seconds. When pressed again, the lamp will switch off
immediately.
The time taken to prepare the food will vary depending on the temperature and
the amount of food.
06. CONSTRUCTION OF THE DEVICE
12