neno Tutti Bedienungsanleitung Seite 9

3. Moisten the bristles at the toothbrush head.
4. Squeeze the toothpaste onto the tootbrush head.
5. Press the toothbrush gently to your teeth and gums.
6. Press the power button to activate the toothbrush vibration, sound and RGB
light. Thoroughly clean each part of your child's teeth. Every 30 seconds of
brushing, the toothbrush will stop for 1 second to allow the user to change
the brushed area. Correct tooth brushing should take a total of 2 minutes.
The device will automatically switch off after 2 minutes.
7. When you're done brushing your teeth, turn off the toothbrush by pressing
the power button again.
8. After cleaning the baby's teeth, wash the toothbrush under running water.
Remove the remaining water from the bristles of the brush and use soft
cloth to wipe the handle of the device.
9. When you are not using the brush, keep it upright.
NOTE: To avoid toothpaste splashing around, turn off the device before removing it
from the baby's mouth. For the sake of your child's hygiene and safety, replace the
brush head every three months.
06. CLEANING THE BRUSH
1. Wash the brush head and its bristles after using the device and let it dry
naturally.
2. Do not press the bristles or pull them out with your fingers. This can deform
the toothbrush and destroy it.
3. Wipe the handle with a soft piece of cloth and let it dry naturally.
4. Do not submerge the handle underwater.
5. Do not use water above 40 °C or acidic cleaning agents to clean the device.
07. FAQ
Q: Vibrations weaken during use:
A: You push the toothbrush too hard. It should gently touch the teeth.
08. SPECIFICATION
Power source: 2x AAA batteries
Waterproof: IPX5
Nylon bristles: Yes
Strokes per minute: 22000
Built-in timer: Yes
Built-in LED light: Yes
Dimensions: 190x30x30mm
Weight: 54g
9