DeLOCK 63320 Bedienungsanleitung Seite 4

English
Turn On Backup Mode
Disconnect the cable between the monitor and the emulator. The
emulator will turn on Backup Mode, and the LED will start flashing.
When Backup Mode is turned on, 2 different modes can be
selected:
A. Copy Monitor EDID
While the LED is blinking, connect the monitor or TV to the
emulator. The emulator will copy the Monitor / TV EDID data. The
data will be permanently stored in the emulator, even when it is
removed from the video source.
B. Reset the Emulator to default settings
While the LED is blinking, do not connect anything to the emulator.
The LED will stop blinking after 10 seconds, and the emulator will
recover to the default factory settings.
Note
When the adapter is connected to the running PC, do not unplug
the connected monitor cable, otherwise the stored EDID data can
be erased.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
Final clause
Information and data contained in this manual are subject to change
without notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted
for any purpose, regardless in which way or by any means,
electronically or mechanically, without explicit written approval of
Delock.
Edition: 12/2022
-4-